VDI
The Association of German Engineers
 
The Association of German Engineers (VDI)
Folgen:  FacebookTwitter

VDI-Standard: VDI 2066 Blatt 1

Generic information
Abstract
Abstract

This standard specifies a manual gravimetric standard reference method (SRM) for the determination of the dust load (dust content) and the dust mass flow of a dust/gas mixture flowing through defined cross-sections (e.g. stacks, pipelines or ducts). Such measurement objectives mainly arise, if dust emissions have to be determined, e.g. in case of a check of compliance with limit or guarantee values, calibration of automated dust emission measuring systems, performance measurements at dust precipitators, and during check or optimization of process parameters. This standard can be applied at different dust contents according to the following application ranges, and in case of measurements in waste gases up to water-vapour saturation without water droplets as well as for measurements in waste gases with water droplets. It is applicable in the following application ranges: application range A: dust mass concentration up to 50 mg/m<(hoch)3>; application range B: dust mass concentration between 50 mg/m<(hoch)3> and 150 mg/m<(hoch)3>; application range C: dust mass concentration between 150 mg/m<(hoch)3> and 2 g/m<(hoch)3>. The sampling time of a single measurement is usually 30 min. This standard is applicable to measurements at stationary sources. For the application range A, the technical requirements of this standard are identical to those of DIN EN 13284-1. In this case, they fulfil the normative requirements of DIN EN 13284-1. For plants covered by European regulations (e.g. Directive 2010/75/EU), the dust measurement according to DIN EN 13284-1 is strictly required. This applies to plants the erection and operation of which is regulated by the 13th or 17th Ordinance on the implementation of the German Federal Immission Control Act (BImSchG). If the dust measurement is carried out for these plants in accordance with application range A of this standard, the equivalence with DIN EN 13284-1 shall be indicated in the measurement report. This standard is addressed to test laboratories performing measurements of dust emissions, to manufacturers of corresponding measuring systems, to competent authorities and to research facilities active in this field.

Table of contents: of the standard
Keywords:

Air pollution, Content, Definitions, Determination of content, Dust, Dust boxes, Dust contents, Dust emissions, Dust load, Dust measurement, Errors in measuring, Flow, Gas flow, Gases, Gravimetry, Measurement, Measuring techniques, Particles, Pollution control, Sampling methods, Test report, Weighing methods

Date:

2019-04

German Title:
English Title:

Particulate matter measurement - Dust measurement in flowing gases - Gravimetric determination of dust load

Formal objection expiry date:

2019-07-31

Technical rules: Richtlinien-Entwurf
Issuing body:

VDI/DIN-Kommission Reinhaltung der Luft (KRdL) - Normenausschuss

Author:

Fachbereich Umweltmesstechnik

Associated VDI Manuals: VDI/DIN-Handbuch Reinhaltung der Luft Band 4
Price:

113,50 EUR

Pages:

48

Classification:

13.040.40

available in:

Deutsch

Keywords:

Air pollution, Content, Definitions, Determination of content, Dust, Dust boxes, Dust contents, Dust emissions, Dust load, Dust measurement, Errors in measuring, Flow, Gas flow, Gases, Gravimetry, Measurement, Measuring techniques, Particles, Pollution control, Sampling methods, Test report, Weighing methods

Fields marked with an asterisk (*) are required.
Please fill all fields marked with an asterisk (*).

VDI 2066 Blatt 1

Given name*:
Surname*:
Company:
Street*:
Postal code, City*:
Email*:
Telephone number:
Upload:

(pdf, doc, docx)
VDI Membership ID:
Commentaries from VDI Members are handled with priority
Your Commentary
ReCaptcha*:
Back to VDI Standard Search